Corona效应预测方法学方法学

Agurtzane etxegarai1,Manuel de la Hoz1,Ane Miren Larrea1,哈维尔·马祖恩(JavierMazón)1
1巴斯克大学UPV/EHU
出版于2020

在高压电气设备的制造中,可以通过预测可能发生电晕效应的可能发生,或者在最坏的情况下,最好在介电击穿,最好在早期阶段来实现正确的介电设计。为此,在整个历史上都使用了几个预测标准来验证何时发生这种现象[1]。在co188金宝搏优惠msol多物理学中,在等离子体模块中添加了一个新的计算选项,该选项允许考虑由于配置引起的电场的排放条件。在Co188金宝搏优惠msol应用程序库上,应用程序ID 74081包括实现该功能的接地球形配置。这种配置的特征是,电场值在整个空间中具有略微不均匀的分布。Pedersen [2]已经在数值上验证了这种配置,但是应用与Comsol中实现的半经验标准以预测排放条件。188金宝搏优惠后来,Warne等。除了支持血浆模块中实现的标准的条件外,由于电场不均匀而引起的其他条件,还建立在其他条件下,这些条件源自同一作者[4]进行的研究。本文旨在将获得的结果与更新的等离子体模块与Pedersen标准进行比较。此外,我们要检查全局和局部曲率对电晕效应对接地球形构型的预测的修改的影响,并引入这些标准在椭球配置上的应用。 The results of such simulations show that the K coefficient resulting from the integration of the ionization coefficient, α, by the number density N, is not the same either in the criteria or in each of the configurations under study. In this way, we can establish the difference between both criteria (Pedersen and the one established by COMSOL) and its dependence on the curvature, which is related to the non-uniformity of the electric field. Thus, we will be also able to conclude which of the criteria is the most conservative in its prediction.

[1] J. P. Donohoe,“略有不同田地的空气崩溃标准的比较”,在IEEE SoutheastCon ’97中。“新世纪的工程”,1997年,第118-120页。[2] A. Pedersen,“在不均匀场中的火花故障或电晕起始电压计算”,IEEE Trans。电源。Syst。,卷。PAS-86,没有。2,第200–206页,1967年。[3] L. K. Warne,R。E。Jorgenson和E. E. Kunhardt,“非均匀领域的火花破裂标准”,J。Appl。Phys。,卷。115,不。14,第1页。 143303, 2014. [4] L. K. Warne, R. E. Jorgenson, and S. D. Nicolaysen, “Ionization Coefficient Approach to Modeling Breakdown in Nonuniform Geometries,” Albuquerque, USA, 2003.